California Axle Spacing Laws

Filter Type:

California Axle Weight Limits Regulations & Requirements

Details: 46,725 pounds with 4’-6” axle spacing, 8-foot width, 4 tires per axle. 58,406 pounds with 4’-6” axle spacing, 10-foot width, 8 tires per axle. 60,000 pounds with a minimum with a minimum 5’-9” axle spacing, 10-foot width, 8 tires per axle. Note: The maximum allowable axle spacing for a tandem axle … california axle law

› Verified 9 days ago

› Url: https://titanww.com/resources/axle-weight-limit/california/ Go Now

› Get more: California axle lawGo Lawyer

California Axle Weight Limits California Steer, Drive

Details: 58,406 pounds with 4’-6” axle spacing, 10-foot width, 8 tires per axle. 60,000 pounds with a minimum with a minimum 5’-9” axle spacing, 10-foot width, 8 tires per axle. Note: The maximum allowable axle spacing for a tandem axle is 8’-0”. Tridem Axles: 51,450 pounds with 9’-0” axle spacing, 8-foot width, 4 tires per axle. 52,500 axle spacing report

› Verified 5 days ago

› Url: https://oversize.io/regulations/axle-weight-calculator/california Go Now

› Get more: Axle spacing reportGo Lawyer

Weight Limitation - California Department of Transportation

Details: 35550. (a) The gross weight on any one axle shall not exceed 20,000 pounds, and the gross weight upon any one wheel, or wheels, supporting one end of an axle, shall not exceed 10,500 pounds. (b) The gross weight limit for any one wheel, or wheels, shall not apply to vehicles with loads of livestock. (c) The maximum wheel load is the lesser of axle spacing on trailers

› Verified 3 days ago

› Url: https://dot.ca.gov/programs/traffic-operations/legal-truck-access/weight-limitation Go Now

› Get more: Axle spacing on trailersGo Lawyer

View Document - California Code of Regulations

Details: 48,000 pounds. Tridem axles. 54,000 pounds. (b) A fire truck designed to carry a minimum capacity of 1,200 gallons and exceed axle weights authorized in California Vehicle Code Section 35551 or Section 35551.5 shall be permanently marked on the manufacturer's GVW rating plate with the gallonage the fire truck is designed to carry. (c) Tandem axle spacing chart

› Verified Just Now

› Url: https://govt.westlaw.com/calregs/Document/IBA7BBEB0742811DFB2D291D2874CF913?contextData=(sc.Default) Go Now

› Get more: Axle spacing chartGo Lawyer

California oversize permits - regulations and information

Details: Single – 20,000. Tandem – 46,000*. Tridem – 58,061 to 60,000*. *These vary depending on axle spacings and routes (ex: Tridem with 9′ of spacings can get 59,168 pounds). Spread axle tandems (8′ to 10′-2″ spread) can only have 40,000 pounds maximum. Tridems with over 10′ spacing (5′ – 5′) can only be permitted for 40,000 axle spacing diagram

› Verified 5 days ago

› Url: https://www.heavyhaul.net/california-permits/ Go Now

› Get more: Axle spacing diagramGo Lawyer

Vehicle Code 35551a VC - Overweight Vehicle in California

Details: the number of axles on a truck, and; axle spacing, or the distance between any group of two or more axles. 4; Axle weight is not a determinative factor. The permitted gross vehicle weights set forth in the statute range from 34,000 pounds to 80,000 pounds. California’s overweight vehicles law exists largely to protect the condition of: washington axle spacing report

› Verified 7 days ago

› Url: https://www.shouselaw.com/ca/defense/vehicle-code/35551a/ Go Now

› Get more: Washington axle spacing reportGo Lawyer

Learn More About California's KPRA Law

Details: The state of California requires all tractor-trailer combinations to meet the King Pin to Rear Axle (KPRA) law. What does that mean to professional drivers? The center of the rear axle on all trailers must be at the 40-foot mark or shorter and must not weigh over 34,000 pounds on the trailer axles. trailer axle spacing diagram

› Verified 3 days ago

› Url: https://www.donhummertrucking.com/blog/2016/11/14/learn-about-california-s-kpra-law Go Now

› Get more: Trailer axle spacing diagramGo Lawyer

Axle Spacing And Tandem To Kingpin Length High Road

Details: Limitations To Axle Spacing. One of the primary methods used to change the weight distribution across a truck's axles is to slide the trailer tandems toward the front or rear of the trailer. But there are laws regulating how far forward or back the tandems can be placed. The two primary laws governing the placement of the tandems are the Bridge Formula and the maximum allowed length from

› Verified Just Now

› Url: https://www.truckingtruth.com/cdl-training-program/page111/axle-spacing-and-tandem-to-kingpin-length Go Now

› Get more:  LawGo Lawyer

Is 53' flatbed CA legal? Page 2 TruckersReport.com

Details: If your trailer is over 48' long your KPRA has to be under 40'. it will depend on where your axles are set on your trailer. Most likely if you have a sliding rear axle you will be fine closed but way over with your axles spread. States with short KPRA laws are the primary reason for a sliding rear axle. IMO

› Verified Just Now

› Url: https://www.thetruckersreport.com/truckingindustryforum/threads/is-53-flatbed-ca-legal.320384/page-2 Go Now

› Get more:  LawGo Lawyer

Kingpin To Rear Axle Length - Page 1 TruckingTruth Forum

Details: California is the one mostly noted, where the limit is 40 foot. So, from the kingpin to the center of the rear axle can be no more than 40 feet in length. Tandems: Tandem Axles. A set of axles spaced close together, legally defined as more than 40 and less than 96 inches apart by the USDOT.

› Verified 1 days ago

› Url: https://www.truckingtruth.com/truckers-forum/Topic-15773/Page-1/kingpin-to-rear-axle-length Go Now

› Get more:  LegalGo Lawyer

California Legal - Trucker Forum - Trucking & Driving

Details: I have a 53' step deck with a sliding rear axle. I only have 2 positions on the axle. It is either a spread axle or closed tandem. It complies with the California bridge law when the axles are closed. Most trailers have a sliding tandem on them. In other words, both axles slide together.

› Verified 2 days ago

› Url: https://classadrivers.com/forum/owner-operators-forums/27988-california-legal.html Go Now

› Get more:  LawGo Lawyer

The External Bridge, or distance between axles 1 to 5

Details: The External Bridge, or distance between axles 1 to 5. We know the weight on all the axles totals 80,000 pounds. We apply the bridge formula or look at the table. The “L” is 51 feet; “N” (number of axles) is 5. After doing the calculations, or looking it up in the table, we find the answer is 80,000. Conclusion: with the 51-foot spacing

› Verified 1 days ago

› Url: https://clermontengineer.org/planning-and-design/the-bridge-formula/the-external-bridge-or-distance-between-axles-1-to-5/ Go Now

› Get more:  LawyerGo Lawyer

Bridge Law Axle Spacing

Details: The FBF is a mathematical formula used to determine the appropriate weight of loads based on axle configuration (number of axles, axle spacing, weight distribution). Show more . Posted in: california axle spacing laws

› Verified 4 days ago

› Url: https://faq-law.com/bridge-law-axle-spacing/ Go Now

› Get more:  LawGo Lawyer

LEGAL LIMITS IN EACH STATE

Details: Tridem – depends on spacing’s Steer – 600 pounds per inch of tread width (13,200 pounds with 11″ tires) Divisible Loads Exceeding 80,000: You can exceed 80,000 gross without a permit on state highways as long as you are legal on all axle/group weights and you are licensed for at least the amount of your gross weight.

› Verified 7 days ago

› Url: http://nationwideexpressservices.weebly.com/uploads/2/9/4/0/2940251/whats_legal_in_each_state.pdf Go Now

› Get more:  LegalGo Lawyer

41 Foot Mark: Where is it REALLY supposed to be

Details: Forty three foot to the center of the axle group allows a 53 foot spread axle to be legal in most states except California, in California, the rear most axle can't be more than 40 feet behind the kingpin, center to center, unless the trailer is 48 feet or less. California legal 53 foot spreads must have the rear axle adjustable.

› Verified 7 days ago

› Url: https://www.thetruckersreport.com/truckingindustryforum/threads/41-foot-mark-where-is-it-really-supposed-to-be.80329/ Go Now

› Get more:  LegalGo Lawyer

Can you drive in CA with your set up The Truckers Forum

Details: You would not need to run with a closed tandem. A 10’/1" spread axle is legal in California. The maximum weight allowed for a 10’/1” tandem would be 40,000 lbs. Also, if the trailer is over 48 feet, you would need to maintain a 40' king pin to rear axle setting in order to comply with CA length laws.

› Verified 4 days ago

› Url: https://www.freightrelocators.com/threads/can-you-drive-in-ca-with-your-set-up.5479/ Go Now

› Get more:  LawGo Lawyer

California Weight & Size Limits - The American Driver

Details: California commercial vehicle weight & size limits. (1) All trailers over 48' up to and including 53' trailers require no more than 40' spacing from kingpin to center of rear axle.

› Verified Just Now

› Url: http://theamericandriver.com/driver_services/files/docs/weight_size_limits/california.html Go Now

› Get more:  LawyerGo Lawyer

Compilation of Existing State Truck Size and Weight Limit Laws

Details: California. The laws governing truck size and weight in the State of California are found in Cal. Vehicle Code §§35001 et seq. On four-axle vehicles, a reduction of 1,000 lbs. for each single foot decrease in axle spacing below 18 feet; On four-axle vehicles, a reduction of 2,000 lbs. for each single foot decrease in axle spacing below 24

› Verified 6 days ago

› Url: https://ops.fhwa.dot.gov/freight/policy/rpt_congress/truck_sw_laws/app_a.htm Go Now

› Get more:  LawGo Lawyer

Bridge Formula Weights- FHWA Freight Management and …

Details: Axle spacing is as important as axle weight in designing bridges. In Figure 1A, the stress on bridge members as a longer truck rolls across is much less than that caused by a short vehicle as shown in Figure 1B, even though both trucks have the same total weight and individual axle weights.

› Verified 4 days ago

› Url: https://www.ops.fhwa.dot.gov/Freight/publications/brdg_frm_wghts/index.htm Go Now

› Get more:  LawyerGo Lawyer

California State Shipping Regulations – Heavy-haul and

Details: Southern California: 909-223-8860. Central California: 916-215-7937. Northern California: 530-941-0121. Inspections usually require a minimum of 20 days before they are performed. If you need to speak to a headquarters equipment engineer you can call 916-653-4385. General contact information for heavy-haul and oversize trucking permits.

› Verified 7 days ago

› Url: https://wideloadshipping.com/california-state-shipping-regulations/ Go Now

› Get more:  LawyerGo Lawyer

California Trailer Laws & Regulations Look-Up - Trailers

Details: California Trailer Signal Laws The combination of vehicles towing a trailer coach or camp trailer must be equipped with a lamp-type turn signal system. Trailers and semitrailers 80 or more inches in width and manufactured after January 1, 1969, must be equipped with a lamp-type turn signal system.

› Verified 6 days ago

› Url: https://trailers.com/state-laws/california.php Go Now

› Get more:  LawGo Lawyer

Spec’ing a trailer Overdrive

Details: California is the only state that has an axle spacing law that requires a distance from the king pin to the rear axle be 40 feet or less. In other states, 43 feet is typical.

› Verified 5 days ago

› Url: https://www.overdriveonline.com/business/article/14874360/specing-a-trailer Go Now

› Get more:  LawGo Lawyer

Weight Limitation – Arrowlink USA Inc

Details: 32,000 lbs. (39,000 lbs with Tri-Axle) 40′ reefer container. 41,000 lbs. California Vehicle Code (section 35550-35558) The provided link above defines maximum weight restrictions in the state of California as they pertain to the hauling of freight on California Roadways. When comparing the maximum weights allowed in ocean containers, with the

› Verified 3 days ago

› Url: https://www.arrowlink.us/weight-limitation/ Go Now

› Get more:  LawyerGo Lawyer

MAXIMUM LEGAL TRUCK LOADINGS AND DIMENSIONS

Details: • Flexible route -11,700 lbs. on a single axle, 10,400 lbs. per axle on a tandem axle assembly. * On any legal combination of vehicles, only one (1) tandem axle assembly shall be permitted at the gross weight of 16,000 lbs. per axle and no other tandem axle assembly in such combination of vehicles shall exceed a gross weight of 13,000 lbs.

› Verified 6 days ago

› Url: http://mdotcf.state.mi.us/public/webforms/public/T-1.pdf Go Now

› Get more:  LegalGo Lawyer

Tandem vs Spread Axles the Pros and Cons - Heavy Haul Trucking

Details: California requires that trailers over 48′ long have a kingpin to center of rear axle of 41′ and this can be difficult for spread axle trailers. The rear axle would have to be able to be slid forward to the 41′ length to be legal. Manitoba does not allow spread axle trailers.

› Verified 7 days ago

› Url: https://www.heavyhaul.net/tandem-vs-spread-axles-the-pros-and-cons/ Go Now

› Get more:  LegalGo Lawyer

California Bridge Laws Axle Diagram - faq-law.com

Details: California Axle Weight Limits California Steer, Drive . 5 hours ago Oversize.io Get All . Axle. Axle groups with an axle spacing over 10 feet mounted to a common frame must be steerable. For more information regarding Maximum Permit Weights on axle groups, view California Weight Charts. Single Axle: 20,000 pounds in general.(per CVC Sec. 35550) 20,000 pounds maximum on a steering axle. …

› Verified 6 days ago

› Url: https://faq-law.com/california-bridge-laws-axle-diagram/ Go Now

› Get more:  LawyerGo Lawyer

Lift Axle Considerations - Equipment - Trucking Info

Details: This "bridge formula" concept, which protects bridge spans and road pavement, necessitates auxiliary lift axles; so do certain "axle-weight" laws still on the books in …

› Verified Just Now

› Url: https://www.truckinginfo.com/150236/lift-axle-considerations Go Now

› Get more:  LawGo Lawyer

Trailer Report: Making Sense of Spread Tandems - Equipment

Details: The distance between the two axles can vary if the vehicle runs within a certain state whose weight law addresses axle spacings. Anything crossing state …

› Verified 1 days ago

› Url: https://www.truckinginfo.com/152652/trailer-report-making-sense-of-spread-tandems Go Now

› Get more:  LawGo Lawyer

Federal Bridge GrossBridge Formula Weight Formula Table

Details: trailer (axles 4 and 5), providing there is a spacing of 36 or more feet between axles 2 and 5. A spacing of 36 feet or more for axles 2 through 5 is satisfactory for an actual W of 68,000 pounds even though the formula or table computes W maximum to be 66,000 to 67,500 pounds for spacings of 36 to 38 feet. This special exception is stated in

› Verified 3 days ago

› Url: https://www.imstransport.com/docs/Federal_Bridge_Gross_Weight_Formula.pdf Go Now

› Get more:  LawyerGo Lawyer

How federal bridge laws influence mixer payload size selection

Details: weight laws. Atypical mixer operator may be sub-ject to federal regulations, state re g u l a - “California does not recognize pusher axles, but they do recognize liftable trailing axles,” Jones says. “Georgia, on the trols the spacing of truck axles on vehicles that use highway bridges.

› Verified 9 days ago

› Url: https://www.concreteconstruction.net/_view-object?id=00000154-1ce1-db06-a1fe-7fe9a90c0000 Go Now

› Get more:  LawGo Lawyer

RULES OF STATE DEPARTMENT OF TRANSPORTATION

Details: Axle weights and spacing are not required for superloads with dimensions only. However, once the gross vehicle weight exceeds 150,000 pounds, axle weights and spacings are required. (l) Superload Plus: A non-divisible load exceeding a gross vehicle weight of 180,000 pounds; requires axle weights and spacings for a complete bridge analysis.

› Verified 8 days ago

› Url: http://www.dot.ga.gov/PartnerSmart/permits/Documents/Rules/672-2.pdf Go Now

› Get more:  LawyerGo Lawyer

Federal Bridge Laws - IMS Transport

Details: Therefore, this axle spacing is satisfactory. Now check axles 2 thru 5 (Figure 7) Actual weight = 17,000 + 17,000 + 17,000 + 17,000 = 68,000 lbs. W maximum, from Table B for "L" of 35 feet and "N" of 4 = 65,500 lbs. This is a violation because the actual weight exceeds the …

› Verified 7 days ago

› Url: https://www.imstransport.com/docs/federal_bridge_laws.pdf Go Now

› Get more:  LawyerGo Lawyer

SP4075 Maximum Weight Limitations Summary

Details: 2. Maximum weight by the group of axles 1 and 2 when 10 feet or more apart is 40,000 lbs. Example No. 2 1. Maximum weight that may be imposed by any axle of this vehicle is 20,000 lbs. 2. Maximum weight by the group of axles 1 and 2 with 10 feet spacing is 40,000 lbs. 3. Maximum weight by the group of axles 2 and 3 with 4 feet spacing is 34,000

› Verified 4 days ago

› Url: https://wisconsindot.gov/Documents/formdocs/sp4075.pdf Go Now

› Get more:  LawyerGo Lawyer

Federal Bridge Laws / Vehicle Weight Laws Dump Trucks

Details: Federal weight limits of vehicles and axle loading limits are governed by the Federal Bridge Law (FBL), which has four primary rules: . The maximum weight allowed on a single axle is 20,000 lbs; The maximum total weight allowed on any two consecutive axles spaced eight or fewer feet apart (like tandem axles) is 34,000 lbs; The maximum allowed Gross Vehicle Weight (GVW), or the …

› Verified 9 days ago

› Url: https://www.superdumps.com/bridge_laws/ Go Now

› Get more:  LawGo Lawyer

WEIGHT: maximum weight attained and no vehicle or

Details: more axles of proper spacing. On all routes, statewide, the maximum wheel load allowed on the foremost and rearmost steering axles is 600 pounds per inch of tire width or the manufacturer’s rated load, whichever is less. On all axles other than the foremost and rearmost steering axles, the maximum wheel load is 500 pounds per

› Verified 4 days ago

› Url: https://dps.mn.gov/divisions/msp/commercial-vehicles/Documents/Pamphlets/weight-limits-pamphlet-2014.pdf Go Now

› Get more:  LawyerGo Lawyer

Bridge Laws By State 2021 - worldpopulationreview.com

Details: Bridge Laws By State 2021. In 1975, the U.S. Congress enacted the bridge formula to limit the weight-length ratio of a vehicle crossing a bridge. This is done by increasing the distance between axels or by spreading weight over additional axles. The reason for the formula is because, during the 1950s and 1960s, trucks grew heavier and began

› Verified 9 days ago

› Url: https://worldpopulationreview.com/state-rankings/bridge-laws-by-state Go Now

› Get more:  LawGo Lawyer

Axle Weight Tables - Arizona Department of Transportation

Details: Overweight Axle Group Chart Distance between the center of the front axle and the center of the rear axle of a given group. Computation Formula: Weight = 1.5 X 700 ( L + 40 ) (L = Distance between the center of the front axle and the center of the rear axle of a given group.) Legend: Line A: Four tires per axle or two 14-inch wide tires.

› Verified 8 days ago

› Url: https://azdot.gov/sites/default/files/2019/06/axle-weight-tables.pdf Go Now

› Get more:  LawyerGo Lawyer

Truck Weight Limits - Oregon

Details: A permit is required for operations on Interstate highways, unless the spacing is 36 feet or greater. Exception 2 Four axles consisting of a set of tandem axles and two axles spaced nine feet or more apart may have a gross weight of 70,000 pounds IF the distance between the first and fourth axle

› Verified 9 days ago

› Url: https://www.oregon.gov/ODOT/MCT/Documents/weight_limits.pdf Go Now

› Get more:  LawyerGo Lawyer

Nevada Bridge Laws / Vehicle Weight Laws Dump Trucks

Details: Federal weight limits of vehicles and axle loading limits are governed by the Federal Bridge Law (FBL), which has four primary rules: . The maximum weight allowed on a single axle is 20,000 lbs; The maximum total weight allowed on any two consecutive axles spaced eight or fewer feet apart (like tandem axles) is 34,000 lbs; The maximum allowed Gross Vehicle Weight (GVW), or the maximum …

› Verified 2 days ago

› Url: https://www.superdumps.com/bridge_laws/?state=Nevada Go Now

› Get more:  LawGo Lawyer

NC DPS: Axle Grouping Weight Charts

Details: Interstate Axle Grouping Weight Chart. Distance in feet between the extremes of any group of two or more consecutive axles. G.S. 20-118 (c) (1) - Two consecutive sets of tandem axles may carry a gross weight of 34,000 pounds each without penalty provided the overall distance between the first and last axles (such as consecutive sets of tandem

› Verified Just Now

› Url: https://www.ncdps.gov/Our-Organization/Law-Enforcement/State-Highway-Patrol/Commercial-Motor-Vehicle-Enforcement/Axle-Grouping-Weight-Charts Go Now

› Get more:  LawyerGo Lawyer

Alabama Axle Weight Limits Regulations & Requirements

Details: Maximum Legal Weight Allowed. The gross weight imposed on the highway by the wheels of any one axle of a vehicle shall not exceed 20,000 pounds, or such other weight, if any, as may be permitted by federal law to keep the state from losing federal funds; provided, that inadequate bridges shall be posted to define load limits.

› Verified 6 days ago

› Url: https://titanww.com/resources/axle-weight-limit/alabama/ Go Now

› Get more:  LawGo Lawyer

OVERSIZE PERMIT HANDBOOK - NCDOT

Details: axles; allowable bridge structure weights. Axle weights: Steer axle 20,000 lbs. Single axle 25,000 lbs. Tandem axles 50,000 lbs. Tridem axles 60,000 lbs. 4 or more axle grouping 68,000 lbs. Single Trip Permit 7 2014_OverSizeWeight_PS.qxd 6/27/14 12:45 PM Page 11

› Verified 9 days ago

› Url: https://connect.ncdot.gov/business/trucking/Documents/Oversize%20Overweight%20Permit%20Handbook.pdf Go Now

› Get more:  LawyerGo Lawyer

What is kingpin and how is it measured?

Details: Tennessee over length law uses kingpin to determine if the vehicle is over length. Some . Carriers get kingpin and bridge law mixed up. Where bridge law is the distance from the . kingpin to center of single axle or center of tandem the over length kingpin is measured . …

› Verified 6 days ago

› Url: https://www.tn.gov/content/dam/tn/tdot/documents/CentralServices/FAQs_TN.pdf Go Now

› Get more:  LawGo Lawyer

FAQ - Commercial License Permits ADOT

Details: Arizona uses the federal bridge formula (see chart in Admin rules R17-6-411 Table 3, Illustration 3) to determine axle weights for overweight vehicles. You will need to know the spacing between each axle, the axle width, the number of tires per axle and the width of tires.

› Verified 1 days ago

› Url: https://azdot.gov/motor-vehicles/faq-motor-vehicle-division/faq-commercial-driver-license/faq-permits Go Now

› Get more:  LawyerGo Lawyer

Axle Weight Table - Wa

Details: Feet 2 Axle 3 Axle 4 Axle 5 Axle 6 Axle 7 Axle 8 Axle 9 Axle 4 34,000 5 34,000 6 34,000 7 34,000 8 & Less 34,000 34,000 *No vehicle or combination of vehicles shall operate upon the public highways of this state with a gross load on any single axle in excess of 20,000 lbs, or upon any group of axles in excess of that set forth in

› Verified Just Now

› Url: http://www.wsdot.wa.gov/publications/manuals/fulltext/M23-09/AxleWeightTable.pdf Go Now

› Get more:  LawyerGo Lawyer